Button on the very end of indicator stalk
1 - 13 of 13 Posts
Yes. Pressing it brings up the Current MPG screen for a few seconds, and then the screen reverts to whatever was on it before. While the info screen is up, if you press it again then it cycles to the next info screen - Trip 1, and again - Trip 2, and a third time back to the current info screen.
Hope that helps.
Hope that helps.
Joined
·
48 Posts
Maybe: Press it and find out?
From the user manual:
"Service indicator zero reset
After each service, the service indicator must be reset to zero. If you have carried out the service on your vehicle yourself:
Switch off the ignition, press and hold the button on the end of the lighting control stalk,
Switch on the ignition; the distance recorder display begins a countdown,
When the display indicates "=0", release the button; the spanner disappears. "
"Service indicator zero reset
After each service, the service indicator must be reset to zero. If you have carried out the service on your vehicle yourself:
Switch off the ignition, press and hold the button on the end of the lighting control stalk,
Switch on the ignition; the distance recorder display begins a countdown,
When the display indicates "=0", release the button; the spanner disappears. "
:lol:
Joined
·
383 Posts
On earlier PSA cars (mk1 C4, C4 Picasso etc) this stall was used to operate the hands free phone set-up but on more modern cars (since about 2010) in normal use isn't operational except to reset the service scheduleFlanders said:
Joined
·
1 Posts
It’s Siri press it and it talks to you
1 - 13 of 13 Posts
Join the discussion
