Space saver correct size?

[geevo]

Never thought of that JB

[Rubik]

Yep, looks good to me and the bit of space round the edges accommodates the nuts..

[Curtains]

Hi all

I am still trying to work out what size spare to get. Would the stud sizes be compatible with the Peugeot 4 stud wheels or an older C4 wheel. I am thinking of the ones in the eBay listings below as I would like the wheel tool tidy as well. Can any one assist?

This one
https://www.ebay.co.uk/itm/2006-CITROEN ... SwldRZ9fx2

Or this one

https://www.ebay.co.uk/itm/GENUINE-CITR ... 4902.l9144

Thanks!

[minimike]

Ok, so referring to the OP. That is the correct size space saver wheel, certainly if you are on 17" alloys. The garage supplied the correct spare but I did purchase the plastic retaining bolt from Citroen. It was less than £8.

It seems that if you are a diesel owner the space saver sits face up with the plastic crew/nut holding it in place. This is due to the Ad Blu tank. The tools are in a pouch with velcro that lives under the passenger seat.

Petrol owners with a spare should find that their space saver sits face down with the plastic mould in the centre to hold all the tools.

Hope this helps.

Mike.

[lennyhope]

I need a FULL SIZE spare wheel/tyre to fulfil driving school regs. What do I get for a FLAIR?

[Curtains]

Had a couple of cactus courtesy cars which have had full size spare tyres in. The correct/official size appears to be:

185/65R15

Rim is J6 with an offset of 23

The bolts are 4 X 108.

The tyres are an 88t

Hope that makes sense

Cheers

[CactiBhoy]

I have removed the tractor sized front tyre I had a spare (Never used it yet) I stumped up £35 for a C4 Alloy (with a serviceable tyre with nail in ) from the net. Because of the adiblu tank for the diesel is fitted, I had to put small pieces of wood under my mat. Now it fits very neatly in there.

in

down

Old but unloved one.

Pretty much a straight replacement in case of puncture.