Citroen C4 Cactus Crossover Forum banner

Low Speed Engine Fan Sensor / Resistor - Part Number & Fitment

13K views 12 replies 7 participants last post by  see_nic  
(edit as done it)

The resister is situated below this air inlet, and that was the stumbling block)
Image


To remove it you needed to slide back the catch, unfortunately the other end is connected to the car. However after removing the screws for the top of the bumper I could see it was a plastic plug that could be prised out.
Image

Once that was done changing the resister was a 5 minute job (undo a torx screw and disconnect the connecters, then fit back).
My resister was in a shocking state
Image